GSMX80 - Linear stepper stage

★Achieving market requirements, improving efficiency for customers.
★Space saving, high positioning accuracy and good collocation.
★ Providing with the advantages of stepper motor which can be partition positioning directly and does not require an external position feedback mechanism.
★ Various option which can collocate with stepper motor and stepper servo drive.

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Update：2022.08.03

Model No.			GSMX80-XA-DX	GSMX80-1I-DX
Mechanical Spec.	Table Size (mm)		80 X 80
	Overall Width (mm)		91
	Overall Height (mm)		30
	Travel Stroke (mm)		20
	Stage Material / Surface Treatment		Aluminum Alloy / Anodized
	Rail		GS07N
	Main Unit Weight (Kg)		1
Precision Spec.	(Closed loop) Resolution (µm)		1
	(Open loop) Max. Speed (mm / sec)		200
	(Closed loop) Max. Speed (mm / sec)		200
	(Open loop) Positioning Presion (µm)		30
	(Closed loop) Positioning Presion (µm)		10
	(Open loop) Repeatability Precision (µm)		± 5
	(Closed loop) Repeatability Precision (µm)		± 1
	Load Capacity (Kgf)		2
	Parallelism (µm)		20
	Dynamic Parallelism (µm)		5
	Thrust (N)		12
Electrical Spec.	(Open loop) Driver Brand / Model		Oriental / CVD223BR-K
	(Closed loop) Driver Brand / Model		GMT / i-SERVO-ST-42M-GM
	Sensor	Origin Sensor	Photoelectric sensor GMT-sensor
		Limit Sensor (Open loop)
		Power Voltage	24V ± 10%
		Control Output	NPN open collector output under 24V 8mA
		Output Control	Testing (sensing)：output transistor OFF (closed)
	Stage Side Connector		15-Pin male end connetor D-SUB
	Controller Side Connector		N / A

System Configuration Diagram

♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.

♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

Vertical movement direction is Z axis.

Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

Green arrows present the specified axis movement direction.

GSMX80 - Linear stepper stage

Payment options