수색
Filters
Close

AR Series - Standard


★ Guide-Deep Groove Ball Bearing, It enables the bearings to accommodate radial and axial loads in both directions to reach high precision and high speed- revolving.
★ Transmission parts-Warm & Warm Gear, It transmits through the gear and is usually used in Reducer.
★ Material-Aluminum Alloy

 更新時間:2018.05.29

型號。 AR39-A3NN-ND AR59-A3NN-ND AR80-A3NN-ND AR100-A3NN-ND
桌子尺寸 Ø39毫米 Ø59毫米 Ø80毫米 Ø100毫米
旅行行程 360°
驅動類型 蝸輪蜗杆(Ratio1 / 120) 蝸輪蜗杆(比率1/180) 蝸輪蜗杆(比率1/180) 蝸輪蜗杆(Ratio1 / 144)
組裝球軸承 交叉滾子軸承
主機重量 0.4公斤 0.6公斤 0.8 Kg 1.2 Kg
Resolution (Pulse) 0.015° / 0.0075° 0.01° / 0.005° 0.0125° / 0.00625°
Maximum Speed (Full Step) 25° / sec 15° / sec 25° / sec
Positioning Precision 0.01°
Repeatability Precision ±0.05°
Load Capacity 4 Kgf 20 Kgf
Missed Step 0.1°
Parallelism 50 μm 

 

System Configuration Diagram

♦   For detailed specifications, please read the description for the stage and connecting cable.

♦   For the selection of driver, please refer to the cross-reference table for the motor/driver of the standard motorized stage or the GMT motor and driver catalogue.

♦   The most preferred driver is recommended to be specified by GMT as considerations. For different needs, please choose the suitable driver based on real functional needs.

 

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

垂直移動方向為Z軸。

圍繞X,Y,Z軸的運動定義為α軸,β軸和θ軸。

綠色箭頭表示指定的軸移動方向。

 

電機/驅動器

 

 

 更新時間:2018.05.29

型號。 AR39-A3NN-ND AR59-A3NN-ND AR80-A3NN-ND AR100-A3NN-ND
桌子尺寸 Ø39毫米 Ø59毫米 Ø80毫米 Ø100毫米
旅行行程 360°
驅動類型 蝸輪蜗杆(Ratio1 / 120) 蝸輪蜗杆(比率1/180) 蝸輪蜗杆(比率1/180) 蝸輪蜗杆(Ratio1 / 144)
組裝球軸承 交叉滾子軸承
主機重量 0.4公斤 0.6公斤 0.8 Kg 1.2 Kg
Resolution (Pulse) 0.015° / 0.0075° 0.01° / 0.005° 0.0125° / 0.00625°
Maximum Speed (Full Step) 25° / sec 15° / sec 25° / sec
Positioning Precision 0.01°
Repeatability Precision ±0.05°
Load Capacity 4 Kgf 20 Kgf
Missed Step 0.1°
Parallelism 50 μm 

 

System Configuration Diagram

♦   For detailed specifications, please read the description for the stage and connecting cable.

♦   For the selection of driver, please refer to the cross-reference table for the motor/driver of the standard motorized stage or the GMT motor and driver catalogue.

♦   The most preferred driver is recommended to be specified by GMT as considerations. For different needs, please choose the suitable driver based on real functional needs.

 

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

垂直移動方向為Z軸。

圍繞X,Y,Z軸的運動定義為α軸,β軸和θ軸。

綠色箭頭表示指定的軸移動方向。

 

電機/驅動器

 

 

제품 사양
Model No. AR
Type Standard
Axis θ Axis
Material Aluminum Alloy
Surface Finish Black anodized
Guide device Deep Groove Ball Bearing
Transmission Parts Worm gears
CTRL press and hold the mouse to move, SHIFT press and hold the mouse to zooom in or out. SKU